Replace a Fuse
Blown fuse can cause number of failures from prevent the battery charging to immobilize the robot. After ensuring that the fuse is the source of problems (e.g. by checking the resistance with a multimeter), the quickest and easiest way to fix your robot may be replacing damaged fuse.
Opening the youBot covers can void you warranty. Therefore before you proceed contact youBot technical support.
Base Powerboard Fuses
The base powerboard takes care of the power distribution in the youBot. Below you can find the location, the function and the type of every fuse of the base powerboard.
Base Controller Fuses
Every base motor is controller by a base controller placed inside the base of the youBot. Below you can find the location, the function and the type of every fuse of the base controller.
Arm Controller and Gripper Fuses
Every joint motor is controlled by one arm controller placed along the joints. The last joint controller is connected with the gripper. Below you can find the location, the function and the type of every fuse of the arm controller.
Go back to Technical Support Hardware
Corrections, suggestions, and new documentation should be posted to the Forum.
