Dismounting the default gripper
From youBot wiki
Revision as of 10:53, 19 December 2014 by Florek-jasinska (Talk | contribs) (Created page with "Before dismounting the default gripper be sure, that the power of the robot is turned OFF. Than rotate the 5th joint, so that you can get at the screws with an Allen wrench. R...")
Before dismounting the default gripper be sure, that the power of the robot is turned OFF. Than rotate the 5th joint, so that you can get at the screws with an Allen wrench. Remove the four screws and hold the gripper (otherwise it could fall down).
Now lift the gripper carefully and take care of the cables, which are still connected with the gripper.