Difference between revisions of "Move the arm in startup (embryo) position"
From youBot wiki
Line 5: | Line 5: | ||
[[File:ArmStartupPosition.jpg|thumb|center|800px|Follow the procedure below to move the arm at the startup (embryo) position]] | [[File:ArmStartupPosition.jpg|thumb|center|800px|Follow the procedure below to move the arm at the startup (embryo) position]] | ||
+ | |||
+ | |||
+ | Go back to [[Technical Support Hardware | Technical Support Hardware]] | ||
+ | |||
+ | ''Corrections, suggestions, and new documentation should be posted to the [http://www.youbot-store.com/forum/ Forum].'' |
Latest revision as of 17:54, 9 February 2015
To use the youBot arm first you have to move it at the startup (embryo) position to calibrate the sensors.
- De-activate the arm, either by pressing the on/off button on the arm or unplugging the arm from power source.
- Rotate the joints by hand in counter-clockwise manner, till they reach their limits following the steps below
Go back to Technical Support Hardware
Corrections, suggestions, and new documentation should be posted to the Forum.