Move the arm in startup (embryo) position
From youBot wiki
Revision as of 17:54, 9 February 2015 by Florek-jasinska (Talk | contribs)
To use the youBot arm first you have to move it at the startup (embryo) position to calibrate the sensors.
- De-activate the arm, either by pressing the on/off button on the arm or unplugging the arm from power source.
- Rotate the joints by hand in counter-clockwise manner, till they reach their limits following the steps below
Go back to Technical Support Hardware
Corrections, suggestions, and new documentation should be posted to the Forum.