Difference between revisions of "Technical Support Software"

From youBot wiki
Jump to: navigation, search
(Errors)
(Errors)
Line 6: Line 6:
 
# [[X ethercad slaved found |X ethercad slaved found ]]
 
# [[X ethercad slaved found |X ethercad slaved found ]]
 
# [[ROS commands are not working properly |ROS commands like roscd or rosmake are not working properly, although ROS was installed ]]
 
# [[ROS commands are not working properly |ROS commands like roscd or rosmake are not working properly, although ROS was installed ]]
# [[l2t exception during initialization | l2t exception during initialization ]]
+
# [[l2t exception | l2t exception]]
 
#
 
#

Revision as of 10:58, 6 February 2015

Errors

  1. No EtherCAT connection / No EtherCAT slaves found!
  2. The youBot base motor controller have to be of type: 174 or 1632
  3. Execute as a root
  4. error while loading shared libraries
  5. X ethercad slaved found
  6. ROS commands like roscd or rosmake are not working properly, although ROS was installed
  7. l2t exception