Difference between revisions of "Technical Support Software"
From youBot wiki
(→Other questions) |
(→Errors) |
||
Line 7: | Line 7: | ||
# [[ROS commands are not working properly |ROS commands like roscd or rosmake are not working properly, although ROS was installed ]] | # [[ROS commands are not working properly |ROS commands like roscd or rosmake are not working properly, although ROS was installed ]] | ||
# [[l2t exception | l2t exception]] | # [[l2t exception | l2t exception]] | ||
− | + | ||
== Other problems == | == Other problems == | ||
# [[Setting control board parameters |Setting password protected control board parameters ]] | # [[Setting control board parameters |Setting password protected control board parameters ]] | ||
# [[Reading voltage values from the battery | Reading voltage values from the battery]] | # [[Reading voltage values from the battery | Reading voltage values from the battery]] | ||
# [[youBot is making unexpected movements when controlled via joypad | youBot is making unexpected movements when controlled via joypad]] | # [[youBot is making unexpected movements when controlled via joypad | youBot is making unexpected movements when controlled via joypad]] |
Revision as of 12:15, 6 February 2015
Errors
- No EtherCAT connection / No EtherCAT slaves found!
- The youBot base motor controller have to be of type: 174 or 1632
- Execute as a root
- error while loading shared libraries
- X ethercad slaved found
- ROS commands like roscd or rosmake are not working properly, although ROS was installed
- l2t exception