Difference between revisions of "Technical Support Software"
From youBot wiki
| (19 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| + | == Errors == | ||
# [[No EtherCAT connection| No EtherCAT connection / No EtherCAT slaves found!]] | # [[No EtherCAT connection| No EtherCAT connection / No EtherCAT slaves found!]] | ||
# [[The youBot base motor controller have to be of type: 174 or 1632 | The youBot base motor controller have to be of type: 174 or 1632]] | # [[The youBot base motor controller have to be of type: 174 or 1632 | The youBot base motor controller have to be of type: 174 or 1632]] | ||
| + | # [[Execute as a root |Execute as a root ]] | ||
| + | # [[ error while loading shared libraries |error while loading shared libraries]] | ||
| + | # [[X EtherCAT slaves found |X EtherCAT slaves found ]] | ||
| + | # [[ROS commands are not working properly |ROS commands like roscd or rosmake are not working properly, although ROS was installed ]] | ||
| + | # [[l2t exception | l2t exception]] | ||
| + | |||
| + | == Other problems == | ||
| + | # [[Setting control board parameters |Setting password protected control board parameters ]] | ||
| + | # [[Reading voltage values from the battery | Reading voltage values from the battery]] | ||
# [[Visualizing performance of robot connected via SSH in Rviz on master device|Visualizing performance of robot connected via SSH in Rviz on master device]] | # [[Visualizing performance of robot connected via SSH in Rviz on master device|Visualizing performance of robot connected via SSH in Rviz on master device]] | ||
Latest revision as of 17:07, 9 February 2015
Errors
- No EtherCAT connection / No EtherCAT slaves found!
- The youBot base motor controller have to be of type: 174 or 1632
- Execute as a root
- error while loading shared libraries
- X EtherCAT slaves found
- ROS commands like roscd or rosmake are not working properly, although ROS was installed
- l2t exception
