Difference between revisions of "Technical Support Hardware"
From youBot wiki
Line 7: | Line 7: | ||
# [[Replacing_the_gripper_with_a_custom_one|Replacing the gripper with a custom one]] | # [[Replacing_the_gripper_with_a_custom_one|Replacing the gripper with a custom one]] | ||
# [[Move_the_arm_in_startup_(embryo)_position |Move the arm in startup (embryo) position]] | # [[Move_the_arm_in_startup_(embryo)_position |Move the arm in startup (embryo) position]] | ||
− | [[No display signal after connecting a screen to the youBot PC|No display signal after connecting a screen to the youBot PC]]] | + | # [[No display signal after connecting a screen to the youBot PC|No display signal after connecting a screen to the youBot PC]]] |
Revision as of 14:30, 7 January 2015
- Handle the battery
- Robot is not working on a battery
- Robot is not working with external power supply
- Replace a Fuse
- Find out which Ethernet/Ethercat Port you are using (eth0 and eth1)
- Replace a platform wheel
- Replacing the gripper with a custom one
- Move the arm in startup (embryo) position
- No display signal after connecting a screen to the youBot PC]