Difference between revisions of "Technical Support Hardware"
From youBot wiki
| Line 6: | Line 6: | ||
# [[Replace_a_wheel|Replace a platform wheel]] | # [[Replace_a_wheel|Replace a platform wheel]] | ||
# [[Replacing_the_gripper_with_a_custom_one|Replacing the gripper with a custom one]] | # [[Replacing_the_gripper_with_a_custom_one|Replacing the gripper with a custom one]] | ||
| − | # [[Move_the_arm_in_startup_(embryo)_position | | + | # [[Move_the_arm_in_startup_(embryo)_position |How to move the arm in startup (embryo) position]] |
# [[No display signal after connecting a screen to the youBot PC|No display signal after connecting a screen to the youBot PC]]] | # [[No display signal after connecting a screen to the youBot PC|No display signal after connecting a screen to the youBot PC]]] | ||
Revision as of 14:18, 4 February 2015
- Handle the battery
- Robot is not working on a battery
- Robot is not working with external power supply
- Replace a Fuse
- Find out which Ethernet/Ethercat Port you are using (eth0 and eth1)
- Replace a platform wheel
- Replacing the gripper with a custom one
- How to move the arm in startup (embryo) position
- No display signal after connecting a screen to the youBot PC]
