Difference between revisions of "Technical Support Hardware"
From youBot wiki
Line 4: | Line 4: | ||
# [[Replace_a_Fuse| Replace a Fuse]] | # [[Replace_a_Fuse| Replace a Fuse]] | ||
# [[Find_out_which_Ethernet/Ethercat_Port_you_are_using_(eth0_and_eth1)| Find out which Ethernet/Ethercat Port you are using (eth0 and eth1)]] | # [[Find_out_which_Ethernet/Ethercat_Port_you_are_using_(eth0_and_eth1)| Find out which Ethernet/Ethercat Port you are using (eth0 and eth1)]] | ||
− | |||
# [[Replacing_the_gripper_with_a_custom_one|Replacing the gripper with a custom one]] | # [[Replacing_the_gripper_with_a_custom_one|Replacing the gripper with a custom one]] | ||
# [[Move_the_arm_in_startup_(embryo)_position |How to move the arm in startup (embryo) position]] | # [[Move_the_arm_in_startup_(embryo)_position |How to move the arm in startup (embryo) position]] | ||
# [[No display signal after connecting a screen to the youBot PC|No display signal after connecting a screen to the youBot PC]] | # [[No display signal after connecting a screen to the youBot PC|No display signal after connecting a screen to the youBot PC]] |
Revision as of 15:50, 4 February 2015
- Handle the battery
- Robot is not working on a battery
- Robot is not working with external power supply
- Replace a Fuse
- Find out which Ethernet/Ethercat Port you are using (eth0 and eth1)
- Replacing the gripper with a custom one
- How to move the arm in startup (embryo) position
- No display signal after connecting a screen to the youBot PC