Difference between revisions of "Technical Support Hardware"
From youBot wiki
| Line 7: | Line 7: | ||
# [[Move_the_arm_in_startup_(embryo)_position |Moving the arm in startup (embryo) position]] | # [[Move_the_arm_in_startup_(embryo)_position |Moving the arm in startup (embryo) position]] | ||
# [[No display signal after connecting a screen to the youBot PC|No display signal after connecting a screen to the youBot PC]] | # [[No display signal after connecting a screen to the youBot PC|No display signal after connecting a screen to the youBot PC]] | ||
| + | # [[One of the grippers finger is not moving | One of the grippers finger is not moving]] | ||
Revision as of 11:35, 6 February 2015
- Handling the battery
- Robot is not working on a battery
- Robot is not working with external power supply
- Replace a Fuse
- Find out which Ethernet/Ethercat Port you are using (eth0 and eth1)
- Replacing the gripper with a custom one
- Moving the arm in startup (embryo) position
- No display signal after connecting a screen to the youBot PC
- One of the grippers finger is not moving
